Drier (High Quality Fish Meal Coil Pipe Drier)

Short Description:

Large heating surface area and perfect drying performance to well ensure the quality of finished fish meal.
With heating jacket, by means of drainage system, take the condensate into the jacket, and then lead into the boiler after utilize the heat, therefore improve boiler efficiency and reduce energy consumption as well.
Equipped with gear surface hardened reducer, low noise and longer lifetime.
With hydraulic clutch enable to restart with load.
Observation window is equipped with light that enable to check the material without opening.
Using S.S. rectangular tube as stand of blades fixed in special position to prevent fishmeal from stacking.
According to the standard of the pressure vessel, all pressure vessels are manufactured with carbon dioxide gas arc welding or low-hydrogen electrode DC welding.
The machine has taken X-ray test and hydraulic pressure test for welding lines by technical supervision office.
Wear-resistant heating coil (disc) to prolong the life time.
With steel foundation instead of concrete foundation, changeable installation location.
Stainless steel top structure with better corrosion resistance.
Use stainless sheet cover after insulation, good-looking and neat.
The gates, windows, top part are made of Stainless Steel;cylinder is made of 16mm Mn steel.

Product Detail

Product Tags

Model	Heating Surface Area （m²）	Dimensions（mm）			Power （kw）
Model	Heating Surface Area （m²）	L	W	H	Power （kw）
SG-Ø1300*7800	88	11015	2600	2855	37
SG-Ø1600*7800	140	10120	2600	3105	45
SG-Ø1600*8700	158	11020	2600	3105	55
SG-Ø1850*10000	230	12326	3000	3425	75
SG-Ø2250*11000	370	13913	3353	3882	90

working principle

The Drier is composed of a rotating shaft with steam heating and a horizontal shell with steam condensate water. In order to improve the drying speed, the shell adopts a sandwich structure, and the condensate water generated by the steam heating of the rotating shaft (generally between 120℃ and 130℃) has a certain heating effect on the fish meal inside the cylinder.

The shaft is welded with heating coils, and the coil is fitted with angle adjustable wheel blades. It can not only heat the fish meal, but also move the fish meal along the direction of the end. The steam distribution device inside the rotating shaft can make the steam evenly distributed to each heating coil. The steam and condensate water flow in the coils on both sides of the coils respectively, so that the heating coils maintains a constant high temperature.

With the rotation of the shaft, the fish meal is fully stirred and mixed under the joint action of the wheel blades and the coils, so that the fish meal has the maximum contact with the rotating shaft and the surface of the coils. The top of the Drier is equipped with a inducting box for collecting waste vapor and preventing the fish meal from being sucked into the ducting pipeline. The closed window cover is used to avoid the inhalation of cold air. The steam enters from the shaft end of the feed port, and the condensate water is discharged from the shaft end of the fishmeal outlet into the jacket, and then discharged from the jacket of the other shaft end, finally converges into the total condensate water pipe.