Model |
Dimensions(mm) |
Power(kw) |
||
L |
W |
H |
||
SJRQ-Ø219*3000 |
3000 |
380 |
640 |
0.25 |
SJRQ-Ø219*4000 |
4000 |
380 |
640 |
0.25 |
The protein water extruded from the Screw Press must be preheated before entering the Tricanter, and the temperature can be controlled at 90℃~95℃, which is conducive to the separation of oil and water. The working principle of Protein Water Heater is to heat protein water by indirect heat exchange between steam and protein water. The steam enters the shell insulation cover from the steam inlet of the power end, and the protein water enters the main shaft of Protein Water Heater from the non-power end. After indirect heat exchange between steam and protein water, the condensate water generated in the heat exchange process is discharged from the condensate outlet at the bottom of the non-power end, and the heated protein water is discharged from the outlet at the power end and then fed into the Tricanter for centrifugal separation. Steam and protein water enter the Protein Water Heater from opposite directions in order to achieve better heating effect, so that the temperature of the protein water discharged from the outlet is the highest.
No. |
Description |
No. |
Description |
1. |
Protein water inlet flange |
5. |
Spindle joint |
2. |
Condensed water outlet flange |
6. |
Steam inlet flange |
3. |
Foot stand |
7. |
Protein water outlet flange |
4. |
Barrel-body parts |
8. |
Insulation cover |